© 2010-2025 駿舟模型 版權所有,並保留所有權利。
共執行 57 個查詢,用時 0.149012 秒,在線 84 人,Gzip 已啟用,佔用記憶體 4.124 MB
Powered by GEJOREv2.7.3
GR6260-01性能參數:
直流輸入電壓:11~30V
最大充電功率:1000W
最大放電功率:80W
充電電流:Max.40A
放電電流:0.1~8A
可充 Li-Lon-Po-Fe 電池 (1-8s)
可充NIMH-NICD電池 (1-20s)
可充PB電池節數:2-24V外形尺寸:138*156*76mm
重量:1240g特征:
采用高效同步整流技術
最大平衡電流: 800mA/節
鎳氫/鎳鎘涓流電流: 50-300mA &。 關閉
可設定截止電壓
鎳氫/鎳鎘Re-Peak充電模式
電池電壓檢測
可通過USB接口連接電腦進行操控和軟件升級
多種安全保護
支持智能手機連接WiFi對充電器進行操控(WiFi模組為選購)。
。
。
。 SKYRC Ultimate 1000W features with high efficiency with synchronous rectification technology, it is accurate and stable and also has some new features and functions. Users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. What's more, users could also use it as Lithium Battery Meter and Lithium Battery Internal Resistance Meter. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use. 。 。 。
。 。 。 。 。 。 。 。 For some small batteries without main connector, you could use the battery socket to charge and discharge the battery to storage status. 。 。 。 。 。 。 。 The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V. 。 。 。 。 。 。 。 。 。
。 。 。 。 Ultimate 1000W employs the circuit that features output power of 1000 watts. It can charge or discharge up 20 cells of NiCd/NiMH or 8 series of Lithium batteries with maximum current of 40A. 。 。 。 。 。 SKYRC Ultimate 1000W employs an individual-cell-voltage balancer. It isn't necessary to connect an external balancer for balance charging. 。 。 。 。 。 The charger can store up to 10 different charge/discharge profiles for your convenience. Users can call out these data at any time without any special program setting. 。 。 。 。 。 The user can check battery's total voltage, the highest voltage, the lowest voltage and each cell's voltage by this charger. 。 。 。 。 。 The user can check battery's total internal resistance and each cell's internal resistance. 。 。 。 。 。 Automatic Charging Current Limit
Capacity Limit
Temperature Threshold
Processing Time Limit。 。 。 。 。 The charger allows user to set the charge/ discharge end voltage. 。 。 。 。 。 The user can monitor pack voltage, cell voltage and other data during the charging, view charge date in realtime graphs, and can also control charging and update firmware from "。Charge Master"。. 。 。 。 。 。 。 The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "。Charge Master"。. 。 。 。 。 。 。 。 。 。 Smart Phone Control via Wi-Fi Module (both iOS and Android) 。 。 This charger can be controlled and operated by smart phones via 。
Wi-Fi module (optional part SK-600075).。 。 。 。 。Revised 。 。2014-12-04 。
會員名稱 | 購買數量 | 購買時間 | 訂單狀態 |
les***** | 1 | 10-28 | 成交 |
彭***** | 1 | 12-10 | 成交 |
was***** | 1 | 12-30 | 成交 |